Control leaves mental efforts

  • Time:
  • Click:92
  • source:XIMENG CNC Machining
Use with groovy cutting speed and revolution but dislocation razor blade is 60 time later the new chance to extricateoneself from an awkward position of milling technology. Still have besides cutting tool of integral hard alloy in domain of high speed cutting currently but dislocation cutting tool. Preferential use field is aluminium alloy is machined and cutting tool, mould is made. The major milling cutter that covers with tiles Er spy company is produced used such bolt to secure means. Have a structure according to the knife of different bit measurement, the face milling cutter of Dc=50mm and the top rotate speed that establish milling cutter are 19, 000-30, 000 R/min; And the top rotate speed of Dc=100mm is 14, 000-24000 R/min. According to this rotate speed, the odd tine feed with appropriate make choice of, for example Fz=0.

2mm, we are attainable its are the biggest feed speed is between 14-33 M/min. When machining aluminium alloy, if choose cutting width to be 90mm, cutting deepness is 1mm, according to different feed, main shaft power needs 17-40kW. Waerte company its of all sorts of cutting tool allowed rotate speed draw to become a chart. When high speed cutting, besides centrifugal force, consider dynamic balancing issue even. To but dislocation milling cutter, be like cutting tool of eliminate sheet tine, waerte's milling cutter already considered a center to balance when the design. It is to protect main shaft only, it is especially when high rotate speed and weight of cutting tool system are greater just have a balance. Because connect the G2 of constant regulation.

The balance grade of 5 is in one part circumstance falls and cannot accord with effective demand quite. CNC Milling CNC Machining